Putting on a timing belt
Putting on a timing belt
Putting on a timing belt, help!?—By Dj
same ? im changing the timing belt on a camry, i marked the camshaft pulley and the crankshaft pulley to the back on the engine. i did not put it on tdc.. i just took the belt off and put a new one on,and the cam and crank is in the exact same spot after tightening everything back up.. i didnt rotate one full time clockwise neither. is this going to be a problam or i can do it this way to?? please help!! thanx
Best Answer —By LeAnne
This MAY work – but why take the chance?
Align the lower pulley on TDC and check the cam pulley to assure that it is exactly aligned with the reference mark – if it isn’t, align it, tighten the belt and turn the engine over clockwise 360 degrees and recheck it. If the marks are good to go, then so are you.
You know what they say……….
You never seem to have the time to do the job right, but you always have the time to do it over.
Loading ...
I use the Sportster 5 and boombox at home (which I love), but I also wanted to have a device ...
